The Nano Hone sharpening system
Lucas Hoffalt
Why do I use the Nano Hone System?
I have tried many water stones from different manufacturers (King, Shapton, Naniwa...), and I can say that Nano Hone stones are excellent. They have a good balance between hardness and abrasion.
What is particularly nice about this system is the rigidity of the supports. This system offers the possibility of bonding a precision-ground aluminum plate that locks into a stand designed for this purpose. You also have the option of making your own stand by attaching screws that will connect to the plate.
Nano Hone sharpening water stones offer a perfectly homogeneous grit, and the progression between the different grits is just perfect.
Splash & go, what is that?
It simply refers to how you should submerge the stones in water. Some porous ceramic stones need to be soaked in water for several minutes and very regularly moistened. This is not the case here; as soon as they are dipped in water, you can use your Nano Hone stones immediately.
The composition of the stones.
Each manufacturer uses different methods: fired ceramic, cold-pressed, different types of binders. All manufacturers keep their manufacturing process secret. For Nano Hone stones, these are cold-pressed non-porous ceramic stones with a binder (resin). All the quality of the stones lies in the resin/abrasive balance. At Nano Hone, there is very little binder, which makes it easy to quickly create a slurry. No need to pass the diamond plate over it six times to obtain it.

Interchangeable supports.
For me, the Nano Hone support plates are truly a plus. They perfectly stiffen the stone even when only a millimeter of stone remains. You can reuse them indefinitely on other stones.
https://outinomi.com/products/pierre-daffutage-ceramique-grain-6000-nano-hone-system

Lifespan.
I have been using Nano Hone stones for many years with intensive use. I sharpen tools of all kinds almost daily. Thanks to my experience, I can assure you of the longevity of these stones. A coarse stone like a 200 will last me more than a year, and the fine stones from 3000 upwards last more than four years. Again, this is intensive use. So these stones are an excellent investment in terms of quality and lifespan.
What is a "Strop" and how do you use it?
The strop originally dates back to ancient civilizations and remains an essential tool in the razor sharpening process. They were made from various materials such as leather, denim, or balsa. Razors must be sharpened regularly using a well-prepared surface. The most common proper technique involves a leather strip with the addition of abrasive paste. The Nano Strop is a bit different and incorporates certain aspects of these traditional strops.
The Nano Strop is designed for longer sharpening sessions. With its 475mm length of abrasive, there are fewer transitions and better angle control. You use it like a barber's strop. With its square aluminum profile, it is perfectly rigid, which will prevent you from creating curves and deforming your edges. It can be used wet or dry. The Nano-Strop is the superior maintenance tool for your edges.

It can be used freehand or placed on a sink and used like a fixed sharpening stone (long stroke).

The diamond resin plate bonded to the frame profile measures 475mm long. There are no other sharpening stones this long. This allows for much longer strokes, which greatly facilitates maintaining the same angle. Conversely, short strokes mean you make more frequent transitions at each end of the stone. It is harder to return to the same angle after the transition. Fewer transitions mean more consistent bevel angles.
The handle is placed under the profile, allowing for a perfect grip in a natural extension of your arm.

https://outinomi.com/products/aiguisoir-affuteur-nano-strop-10-microns