How to make your own hammer handle
Lucas Hoffalt
No orthodoxy, a handle adapted to your needs.
There are different possible shapes and sizes of handles for your hammers. Although there is a good guiding principle for defining the appropriate size of your handle, there is no orthodoxy in this matter. The handle must be shaped according to your needs and what you appreciate in terms of ergonomics.
Which wood species to choose?
Traditionally in Japan, two types of wood are used: white oak "shirakashi" or wild cherry (a branch). For European woods, one can use beech, chestnut, or ash. You must choose a ductile wood that will withstand the impact, so avoid woods that are too hard or brittle.
Which cross-section and length are suitable?
In Toshio Odate's reference book, one can see that a good length is defined by the section that starts from the head when held in the hand up to where the handle stops at the elbow joint.
Do not hesitate to make a longer handle at first and then shorten it to adjust it correctly. For the cross-section, you will have to base it on both the weight of the hammer and the size of your hand; a smaller cross-section will be used for lighter hammers. 30mm is a good radius on average.
The handle profile:
There are several profile shapes. There is a classic, commonly used profile that is oval in shape. Another very interesting profile is more triangular (with rounded edges); this is called a Tokyo profile.
Which tools should be used to shape your handle?
You can use a drawknife to rough out a branch or your piece of wood. The handle must gradually reduce as it approaches the eye, so do not hesitate to start with a tapered blank.
A sori kanna (convex plane) will clearly be a plus for shaping the curves of your handle.
With or without a wedge? Traditionally, Japanese craftsmen do not use a wedge to secure the head. This demonstrates that the handle is very tightly fitted and has been forced into the head. This is why it is preferable for the end of the handle to stop a few millimeters before exiting the eye. You will compress the end of the handle before inserting it; as it returns to its shape, this will finish crimping the handle.
However, nothing prevents you from using a wedge if it is easier for you and makes you feel more secure. But the advantage of not using a wedge is being able to change and modify the handle more easily.
All these details are both elegant and refined, but the intelligence of the hand must be able to express itself on these tools. And taking pleasure in making these tools is part of the woodworking trades.
